120W ASA IP65 Waterproof LED Flood Light with Bridgelux chip and Meanwell driver

1, Features:
Full waterproof design 
High transmittance empered glass,transimittan 93% 
The radiating area 4260cm² 
Multi-Chip on lead frame,single module LED package design 
System design integrating power supply,LED light engine ,and heat sink 
Over Current,Over Voltage,Over Heat,Thunder Protection 
Choice of correlated color temperatures 
Long lifespan for LED 50,000 hrs 
Complying with CE,ROHS, No strobing during working, Fast response (no delay) , No

mercury vapour ,No radiation,No UV,No damage with frequency switching 
IP Rating: IP65 
Power supply direct touch the radiator,in light weight

2,Application area: 
Replacing traditional High Pressure Sodium lamp or metal halide lamp. 
Widely used for advertise billboard ,exterior wall of hotel and related landscape lighting

3,Product Dimensions:

Attentions:

1,All dimension units are millimeters.

2,All dimension tolerance is ±1mm unless otherwise noted.

4,Product Specification:

Input voltage: AC85V265V
Freqency range: 50HZ60HZ
Tatal harmouic distortion: ≤9%
Power facor:  ≥0.9
Power efficiency:  85%
Sysem consumption: 125W

LED package: Multi-chip on led frame,Single module
LED consumption: 10W
LED Working voltage: DC3036V
LED quantity:2PCS
LED luminous: 11500 lm
LED luminous efficiency: 90100 lm/W
CRI: 80
Average illuminance:
H=6m 88 lux 
H=8m 52 lux
H=10m 33 lux 
Facula area:
H=6m 10m×10m
H=8m 13m×13m
H=10m 16m×16m
Illuminance uniformity: 0.68
LED Junction temperature: ≤60
Operational condition: Temperature -4060
Humidity  10%90%RH
Storage temperature: -4085
Working life-span: 50,000H
Connect wire: Brown-L Blue-N Yellow/Green-G
Beam angle: 120°
IP Grad: IP65 
Housing:  ABS and AI alloy
Mounting Height: Suitable for 810m height

5,Connect wire:           

Blue—Neutral 
Brown—Line

Yellow/Green—Ground

6,Polar Diagram of Luminance:

7,ISOLUX CURVE:

Attentions:
All data is under 25,unless otherwise specified 

8,Package:

1 Set = 405mm×405mm×265mm 3.72Kg 
1 Carton = 2 Set Size: 430mm×430mm×600mm  16.8Kg

9,Installation: 
Installation tool:  A adjustable wrench group. 
Installation Steps: 
Tighten Axle Screw, and Locate Screw 
Connecting the power line of LED Flood Light to the power supplier ,finish the installation procedure 
The installation notices: 
No necessary using other devices for LED Flood light installation such as            stabilizer,  regulator and so on 
Opening the light and lifting the buckle is unallowable.           Soaking in the    water is unallowable

10,Warning: 
Do Not Use Other Devices for LED Floodlight Installation Such as Stabilizer,  
Regulator …etc 
Do Not Open the Light Engine 
Do Not Soak the Floodlight into Water 
Do Not Light up the System Without Grounding 
Do Not Use Dimmer 

11,Warranty:

2 Years Warranty Starts from Taking Delivery of Goods a Day. The Warranty Content
Includes the Damage of All Components, Such as LED Light Source and Power 

Supply...etc.

The Floodlight Must Operate at the Common Normal Environment. As in Order to 
be Faced by the Sea Road in 3 Kilometers or to Use in the Bad Environment Such       as Tunnel, Warranty Period is Within 1 Year.

The Calculation of Warranty Period with Turn on the Light for a Day 8-10 Hours is Limited. As Everyday Longer Than 10 Hours, Then Gradually Decrease According to Comparison Warranty Time Limit.